BeiJing Sinocleansky Technologies Corp

CNG injection rail and valves

  • Description

Injector Rail

Product Description

LPG Injector Rail is a very important kit for LPG injection system. High frequency Fuel gas Injection Rail configuration is very compact and easy to clean. Its working pressure is 0.8-2.5 bar, Coil-loop resistance value is 3 ohm.

Product Feature

Fuel gas Injection Rail with the engine filling gas tube have pressure gap value, then LPG pressure sensor change the pressure gap to electrical signal then send this signal to Fuel ECU. Now we have Injection for 4cylinder and 6cylinder.

Product Specification/Models

Fuel gas Injection Rail with the engine filling gas tube have pressure gap value, then LPG pressure sensor change the pressure gap to electrical signal then send this signal to Fuel ECU. Now we have Injection for 4cylinder and 6cylinder.

 

Other Information

Maintenance Instructions:

1. Ensure that the main system solenoid valve is closed, allowing no LPG flow.

2. Remove injector from System.

3. Use a flat head screwdriver to extract the benzing ring and remove the armature together with the coil.

4. Unscrew the plunger-housing with a hexagonal wrench and inspect the interior.

5. Clean the mobile plunger and the interior of the housing to remove any residue.

6. Use only compressed air, petrol or kerosene to clean the plunger port.

 

 

CNG filling valve

 

Specifications

QF-T3H CNG filling valve
Working pressure:20MPa
Inlet:Connection nut 12
Outlet:Connection nut 6

 Details of QF-T3H and other valves in the series:

 

Type

WP

MPa

DN

mm

Outlet thread

Inlet thread

PRD

QF-T3H

20

4

connection nut 6

connection nut 12

NO

QF-T3A

20

4

connection nut 6

connection nut 12

NO

QF-T3A2

20

4

connection nut 6

connection nut 6

NO

QF-T3B

20

4

connection nut 6

connection nut 6

NO

QF-T3C

20

4

Connection nut 6

Connection nut 12

NO